Description
This package includes all high quality, pre-machined components needed to build an FGC9 MKI or MKII except printed parts, barrel, and an AR FCG.
No metalwork, JB weld, or threadlocker is required to build this kit… even the hex key for MK2 charging handle is precut! Simply print parts, assemble with provided hardware, and shoot!
Advantages over all competing FGC9 kits, and original DIY design:
- No metalwork whatsoever required for a full FGC9 build! All competing kits require welding, drilling, filing, epoxying, or some combination thereof.
- No JB weld or threadlocker! – FGCKits printed carrier attaches with screws, making for a fully rebuild able finished product. Updated 2022 bolt design removes need for thread locker or structural M5 bolt screws.
- FGCKits designed single piece CNC machined, hardened A2 tool steel firing pin ensures no firing pin failures or mushrooming observed in competing products. FGCKits custom bolt carrier STL and properly selected hardware improves retention of firing pin and firing pin spring life over original DD design.
- Revised bolt and carrier geometry eliminates popped primers, OOB discharges, and firing pin retention issues sometimes seen with competing FGC9 kits and homebuilds.
- We stand by our products – If you break it, we replace it!
We do not sell barrels, however Glock 19 barrels are recommended due to their steel feed ramp. Glock barrel adapter .STLs are provided via email along with an STL pack containing a variety of upgraded printed parts and modifications. No instructions, labeling, or identifying markings will be included in the package.
Extra hardware included for printed hammer strike face, printed fire selector, AR milspec carbine buffer adapter, and
locking pistol brace (included in STL pack)
Cameron –
Perfect. Included everything I needed that wasn’t printed — and not having to epoxy the bolt in place is a huge added bonus for serviceability. If you want an FGC-9 but don’t want to weld / drill / epoxy — Or even if you just don’t want to track down every little hardware piece — this kit its the absolute best way to do it.
Yosemite Sam –
Very nice FGC9 kit, I was a little nervous because of the adapters for the glock barrel….. But it has worked out very nicely, first 50 rds, 0 failures everything worked perfectly, firing pin was just the right length along with firing pin spring, just install all parts with your printed parts and your good to go….. The Glock barrel adapters were the biggest time suck….. They require a lot of sanding inside and out to make fit….. But when your done, it’s worth it.
GeneralScotty’s Response: Glad you’re happy with the kit! Since your comment, I have designed and added a “Glock adapter sanding tool” to the STL pack to enable sanding the OD of the adapter using a power drill. No more elbow grease needed. Thank you for your valuable feedback!
Carl –
This kit came with everything I needed and then some. No welding or epoxying, as the others have mentioned. It’s a huge help and this was the turning point for me making one. The machining and fit on the parts are fantastic, which made it even more of a breeze.
Fat Albert (verified owner) –
Definitely an essential for making your MK2 if you want to go for a minimal hassle build. Worked perfectly for mine without issue. Planning to order more in the future.
Invisible gun (verified owner) –
Customer service is amazing! Received tons of updates answered all my questions and kit was great! Will definitely be ordering another kit soon.
Http.Media1k (verified owner) –
Have purchased a couple kits every single one has been great and dude is awesome at responding with good customer service